Brembo HPK (High Performance Kit) products are intended for anyone looking for maximum braking performance from standard wide track components. They are designed to interchange with original equipment parts so that you can fit just discs, just callipers, just master cylinders, a complete kit or any combination that you require. They can be used for Road, Track and Full Race use and have won world championships right up to World Supersport level.
To assist in selecting the correct parts for your model please download the PDF file at the following link:
Brembo HPK Application Data Sheet
The discs are model specific and are either the same diameter as the originals, as required for many race series or increased to 320mm to increase braking. This means you can use a high performance disc in many race series whilst maintaining the OE calipers if the series rules so dictate. They are 5.5mm thick rather than 4.5mm OE to allow for higher performance and can be used for Road, Track and Full Race use. This gives you World Class Braking at an affordable price.
Radial mount two piece, 2 pad Racing and High Performance Caliper. Designed for use with discs of a maximum thickness of 5.5mm in 300mm, 310mm or 320mm diameter. CNC machined from solid. Dark Gold hard anodised finish with Red Brembo branding. 4 pot aluminium pistons with racing seals and road dust seals. Quick release pad pin. For use with stainless steel wide track discs. These calipers are sold in sets and come with brake pads.
M4 Forged Radial Monobloc
Radial mount one piece forged monobloc caliper used on the Ducati, KTM and other modern European Superbikes. Probably, the best production caliper in the world. Red Brembo branding, 4 x 34mm pistons and designed fur use with normal wide track discs with a maximum 5.5mm thickness. These calipers are sold in sets and come with brake pads.
HPK Rear caliper
Two piece, 2 pad Racing and High Performance Caliper with 84mm mounting centre's. CNC machined from solid. Dark Gold hard anodised finish with Red Brembo branding. 2 pot aluminium pistons with racing seals and road dust seals. Quick release pad pin. Includes brake pads.
Fits as an upgrade on the standard mounting of most sporting Ducati and other European models. Where required the kit comes with additional mounting bracket to fit to the original swing arm to allow the caliper to be 'underslung' under the swing arm.
Brembo's very latest forged master cylinder is the RCS. The 19mm brake and clutch unit is adjustable for 18 or 20 ratio and the 16mm clutch and 15mm Single Disc Brake unit are adjustable for 18 or 16 ratio. 19mm will power any Twin Disc system and 15mm any Single Disc System. The adjustable ratio allows you change the 'feel' and set it to your preferred position. Levers are span adjustable and the brake unit is supplied with a brake light switch.